1. "Two new designs of 'field mill' type fieldmeters not requiring earthing of the rotating chopper" J. N. Chubb IEEE IAS 26 Nov/Dec 1990 p1178-1181.

2. "Experience with electrostatic fieldmeter instruments with no earthing of the rotating chopper" J. N. Chubb Inst Physics Conference 'Electrostatics 1999' Cambridge 28-31 March 1999 IoP Confr Series 163 p443-446.

3. "Assessing the suitabilitiy of materials" Paper presented at Institute of Physics 'Electrostatics Group' meeting 8 Jan, 2003, in London.

4. "Static electricity: Assessing problems and solutions" J. N. Chubb 'Pharmaceutical Cleanrooms 2003' 17-19 March, 2003 at De Vere University Arms Hotel, Cambridge.

5. "Predicting the maximum voltages expected on inhabited cleanroom garments in practical use" J. N. Chubb, P. Holdstock (BTTG) and M. Dyer (William Barnet and Son Inc). Paper presented at Institute of Physics 'Electrostatics 2003' Heriot Watt University, Edinburgh, 23-27 March, 2003.

6. "Electrostatic safety during the solvent extraction of copper" J. N. Chubb, P. Lagos (IDT, Santiago, Chile) and J. Lienlaf (Codelco Chile - Radomiro Tomic, Chile). To be published in J. Electrostatics. (Paper presented at Institute of Physics 'Electrostatics 2003' Heriot Watt University, Edinburgh, 23-27 March, 2003).

7. "Predicting the maximum surface voltages expected on inhabited cleanroom garments in practical use" J. N. Chubb, P. Holdstock (BTTG) and M. Dyer (William Barnet and Son Inc). Paper to be presented at ESTECH 2003, Contamination Control Division, Phoenix, Arizona.18-21 May, 2003

8. Procedure for predicting the maximum surface voltages to be expected on inhabited garments developed by John Chubb Instrumenation

9. "Surface potential helps assess ESD properties of materials" John Chubb. 'Evaluation Engineering' September, 2003

10. "Can we anticipate if we will have problems from static electricity?" John Chubb. Article to be published in 'Electronics manufacture and test' October, 2003

11. "Can we avoid problems from static electricity?" John Chubb. Article to be published in 'Cleanrooms' October, 2003

12. "Comments on methods for charge decay measurement" John Chubb. J. Electrostatics 62 2004 p73-80.

13. "Comments on the preparation of standards" Some personal comments by John Chubb.

14. "Experimental comparison of the electrostatic performance of materials with tribocharging and with corona charging"

15. "Test method to assess the electrostatic suitability of materials for retained electrostatic charge" Document prepared for discussion as prospective British Standard.

16. "The electrosta tic suitability of materials" Paper offered for publication in J. Electrostatics, Dec 2004.

17. "Measurement of charge transfer in electrostatic discharges" Paper offered for publication in J. Electrostatics, Dec 2004

18. "Electrostatic Ignition Risks and Tank Washing Operations" Article in Toftejorg On-line magazine Dec 2004 (http://www.toftejorg-tech.com/sw7663.asp)

19. "Non-contact measurement of the electric field shielding performance and the resistivity of layer materials" J. Electrostatics 64 (2006) p685-689.

20. "Electrostatic safety during solvent extraction" Paper by John Chubb and Graham Hearn presented at Centre for Separation Technology Workshop at Lappeenranta University of Technology, Lappeeranta, Finland 8 & 9 August, 2005

21. "Assessing the electrostatic suitability of materials" Published in 'Evaluation Engineering' 24 August 2006

22. "A Standard proposed for assessing the electrostatic suitability of materials" J. Electrostatics 65 2007 p607-610
23. "Tribocharging studies on inhabited cleanroom garments" Paper submitted May 2008 and now approved for publication in J. Electrostatics

John Chubb Instrumentation Ltd,
Unit 30, Lansdown Industrial Estate, Gloucester Road, Cheltenham, GL51 8PL, UK
Tel:+44 (0)1242 573347 Fax: +44 (0)1242 251388
email: jchubb@jci.co.uk

© John Chubb Instrumentation.